Remove the impurities, residual chlorine, color and odor, alkaline small molecule water, and oil in the water
Filter cartridge can be cleaned and used repeatedly
Remove bacteria and microorganisms in water
Faucet 360°rotatable adjustable
This faucet can only be used with cold water
Specification
Item No.
RF-22
Water inlet
municipal tap water
Total treated water volume
10000L
Water flow
6L/min
Operating pressure
0.1-0.6MPa
Filter material:
PP cotton, CTO, oil-free mineral
Working method
pressure of tap water pipeline
Environmental temp.
0-45℃
Inlet water temp.
0-90℃
Product material
lead-free cooper
Product process
integrated forming
Filter life
6 months
Weight
2.5kg
Size
W21.2 x D10.1 x H45cm
Product detail
This faucet can only be used with cold water
Content material
Ceramic filter, can be washed and used repeatedly, environmentally friendly and economical
The filter cartridge an be repeatedly brushed 100~120 times
The removal rate of bacteria in water reaches 99.9%
Diatomite is made by molding and sintering at high temperature.
Effectively remove residual solids and bacteria in water
Filter out rust, sediment, algae, suspended impurities in water
The filter can be brushed and used repeatedly, with a long life
Filter out germs over 0.5 microns in volume.
Advantage
Use lead-free copper material
The appearance is easy to maintain and clean, keep it bright and tidy
Combine filter, tap
Remove impurities and sand in water
Remove bacteria and microorganisms in water
Ceramic filter can be brushed repeatedly
One-handed control
Easy to replace the filter cartridge
Wash the filter cartridge
Under normal operation, when the water flow starts to slow down, take out the filter cartridge and wash it with a soft cloth. When wiping and scrubbing, you only need to wash it under the tap water. Do not use any detergent to prevent the detergent from penetrating into the pores of the filter and affecting filtration.
According to the different water quality in different places, the filter cartridge can be cleaned once about 1 to 2 weeks. Use tap water with a soft cloth to scrub the surface of the filter cartridge.
Remove the dirt on the surface of the filter cartridge to expose the white layer!
If you repeat cleaning until the surface of the filter cartridge is damaged and the surface pore size becomes larger, please replace the filter cartridge!
Note! The ceramic filter is fragile, so be careful when cleaning it to avoid damage to the filter.
Depending on the water quality, water pressure, and water consumption of the area where it is used, the frequency of filter replacement will also vary.
