Manual Lathes Machines Series : SUN MASTER Manual Lathes Supplier

RML Series

E.V.S models with auto lubrication system to headstock & external tank for cooling the oil All models with one piece solid stand All models with universal feed gearbox & reversable apron All models meet CE. (on request) All models with 52.5mm (2.066") spindle bore, ASA D1-6 FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model. Wider bed way which give absorbs vibration. E.V.S. MODEL ELECTRIC CONTROL CE electric on request. The electric cabinet is sealed protected against entrance of water, dirt and other contaminants. A main disconnect switch provided. Electric 1/4HP pump for headstock pressure lubrication. Prolong life expectancy of gears and spindle. Combination of forced lubrication and oil bath system in headstock. HEAVY DUTY SPINDLE Machined from forged alloy steel, hardened ground & dynamically balanced. Supported by three points precision bearings (2 taper roller & 1 ball bearing). E.V.S. HEADSTOCK Forced lubrication to all running points. Hardened & ground gears and shafts. R.P.M. LED display indicator makes it easy to obtain the optional constant surface. Electronic control panel located on top head stock, with RPM display unit, speed control electric knob, emergency stop and motor start push button. Electronic infinitely variable speed with A.C. motor inverter. Two headstock gear speed ranges supply a high torque in low range from 20 up to 400 RPM and in high range from 400 up to 2500 R.P.M. ACCESSORIES STANDARD ACCESSORIES: Backplate for 9" chuck Dead center MT.4 Dead center MT.4 with carbide tip Spindle center sleeve MT.6 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 9" chuck 4-Jaws independent 10" chuck 5C collet closer attachment 5C collets (metric or inch) Driving plate with dog Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 12" Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

AHL-V Series

Все модели с механическими сцеплениями. (Исключая модель E.V.S. Все модели имеют автоматические системы смазки для масляного охлаждения шпинделя и наружного масляного бака Все модели соответствуют CE. (по запросу) Все модели с отверстием шпинделя 80 мм (3,149 дюйма), ASA D1-8 характеристика Все отливки могут надлежащим образом стабилизировать и снять напряжение. Дорога кровати закалена, а земля минимальна. HS-70. Кровать и вагон покрыты еловым покрытием B. Очень низкий уровень шума. Обеспечить педаль ножного тормоза. Встроенный насос охлаждающей жидкости и аксессуары. E.V.S, требуемый CSS (постоянный контроль поверхностной скорости). Модель. Широкая поверхность кровати дает способ поглощать вибрацию. смазка Окно уровня масла для эффективной проверки активности уровня масла. Система смазки под давлением шпиндельной коробки может обеспечить смазку и охлаждение шпиндельной коробки при высокоскоростной резке. Брызги смазки подающей коробки передач и юбки. Кронштейны и горки Корпус поглощает вибрацию и не отклоняется. Шестерни закалены и MAAG или REISHAUER. коробка передач Универсальный тип допускает широкий диапазон дюймов, метров, миллисекунд, миллисекунд. Резьба без зубчатой передачи. Индукционная закалка точного шлифования зубчатых колес. фартук По запросу могут быть поставлены колеса R/H или L/H. Интегрированное автоматическое управление вертикальной, поперечной, прямой и обратной подачей. Кронштейны и горки Антиплавающая конструкция, удалитель зазора. Установлен в крестообразной скользящей гайке. Предохранительная муфта на валу подачи. Одноразовая смазка скользит по кузову и верхней части. Двойной циферблат поставляется с дюймовыми системными винтами. Метрические циферблаты поставляются только для метрических систем. характеристика безопасности Хвостовая нейлоновая предохранительная шестерня. Режущий штифт в винте. Тяжелый шпиндель. Изготовлен из кованой легированной стали, закаленный грунт, динамически сбалансированный. Высокоточные трехточечные опоры, станки с коническими роликами и шарикоподшипниками. Приложение Стандартные аксессуары: Задняя панель патрона 12 дюймов Мертвая точка MT.5 Мертвая точка наконечника цементированного карбида MT.5 Центральная втулка шпинделя MT.7 Горизонтальная прокладка... 8 штук Набор инструментов и наборы инструментов Руководство по эксплуатации и перечень деталей галогенная лампа брызгозащитная плита полной длины Дополнительные аксессуары: 12-дюймовый патрон с 3 когтями 4-когтевой независимый патрон 12 "18... или 14" 21... 5C патрон более плотный аксессуар Защитное устройство патрона CE Электрическая система Цифровая система считывания миниатюрный стопор вагона держатель долота Центр вращения MT.5 Конусный токарный приспособление Стабильная опора W/шариковый подшипник следящая опора W/бронзовый наконечник быстросменный держатель CE Защитная крышка на винте

CH-V Series

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Extremely low noise level. Foot brake pedal provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. Oil distributor may be adjusted to lubricate bedways, cross slide, or both. Automatic and manual forced lubrication pump offered oil to bed ways and cross slide. RUGGED HEADSTOCK Forced lubrication to all running points. Head housing features outstanding vibration dampening and deformation free performance. Rugged head construction gives extra rigidity and heavy cutting. All gears and shaft are hardened and precision ground. UNIVERSAL GEARBOX The universal type gear box provides a wide range of inch & metric threads without changing any gear for increasing convenience. Gears are hardened Oil bath lubrication in gear box HEAVY DUTY SPINDLE Camlock type spindle Precision machined from forged alloy steel, hardened, precision ground and dynamically balanced. Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting. APRON A manual & automatic lubrication system equipped to keep the sliding ways and bedways lubricated. Choice of right or left hand wheel. An overload protection device equipped to avoid machine damaged. RUGGED TAILSTOCK Tailstock quill is graduated in inch / metric scales. It has a tang slot for positive drive of tool. Two - step tailstock provide smoothly operation. ACCESSORIES STANDARD ACCESSORIES: Backplate for 12" chuck Dead center MT.5 Dead center MT.5 with carbide tip Spindle center sleeve MT#7 * MT#5 Level pads......6 ~ 10 pcs Tool set & Box Operation manual & parts list Full length splash guard Halogen lamp OPTIONAL ACCESSORIES: 3-Jaws scroll 12" / 16” chuck 4-Jaws independent chuck 16" & 18” Faceplate 20" Chuck safety guard Electrical system for CE Digital read out system Carriage micro stop set Drill chuck & arbor Rotating center MT.5 Taper turning attachment Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post Protect cover on leadscrew for CE

Серия FC-V

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator fitted in cross slide nut. Safety clutch at feed shaft. Oneshot lubrication in carriage & top slide. Dual dials supply inchsystem screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Three point support by high grade precision, machine tool taper roller & ball bearings. ACCESSORIES STANDARD ACCESSORIES: Backplate for 10" chuck Dead center MT.5 Dead center MT.4 with carbide tip Spindle center sleeve........O85mm Taper 1/19.18 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 10" chuck 4-Jaws independent 12" chuck 5C collet closer attachment 5C collets (metric or inch) Faceplate 14" Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

TC-V Series

RML-V Series

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model. Wider bed way which give absorbs vibration. E.V.S. MODEL ELECTRIC CONTROL CE electric on request. The electric cabinet is sealed protected against entrance of water, dirt and other contaminants. A main disconnect switch provided. Electric 1/4HP pump for headstock pressure lubrication. Prolong life expectancy of gears and spindle. Combination of forced lubrication and oil bath system in headstock. HEAVY DUTY SPINDLE Machined from forged alloy steel, hardened ground & dynamically balanced. Supported by three points precision bearings (2 taper roller & 1 ball bearing). E.V.S. HEADSTOCK Forced lubrication to all running points. Hardened & ground gears and shafts. R.P.M. LED display indicator makes it easy to obtain the optional constant surface. Electronic control panel located on top head stock, with RPM display unit, speed control electric knob, emergency stop and motor start push button. Electronic infinitely variable speed with A.C. motor inverter. Two headstock gear speed ranges supply a high torque in low range from 20 up to 400 RPM and in high range from 400 up to 2500 R.P.M. ACCESSORIES STANDARD ACCESSORIES: Backplate for 9" chuck Dead center MT.4 Dead center MT.4 with carbide tip Spindle center sleeve MT.6 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 9" chuck 4-Jaws independent 10" chuck 5C collet closer attachment Driving plate with dog Chuck safety guard Electrical system for CE Digital read out system Faceplate 12" Carriage micro stop set Drill chuck & arbor Rotating center MT.4 Taper turning attachment Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post

ERL-V Series

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model Wider bed way which give absorbs vibration HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator. fitted in cross slide nut. Safety clutch at feed shaft. One shot lubrication in carriage & top slide. Dual dials supply inch system screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Two point support by high grade precision, machine tool taper roller. ACCESSORIES STANDARD ACCESSORIES: Backplate for 7" chuck Dead center MT.3 Dead center MT.3 with carbide tip Spindle center sleeve MT.5 Level pads......6 pcs Tool set & Box Operation manual & parts list Full length splash guard Halogen lamp OPTIONAL ACCESSORIES: 3-Jaws scroll 7" chuck 4-Jaws independent 8" chuck 5C collet closer attachment Driving plate with dog Chuck safety guard Electrical system for CE Faceplate 12" Digital read out system Rotating center MT.3 Drill chuck & arbor Taper turning attachment Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post Protect cover on leadscrew for CE

Серия TC

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC 48 - 55. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. STANDARD ACCESSORIES: Backplate for 9" chuck Dead center MT.4 Dead center MT.4 with carbide tip Spindle center sleeve MT.6 Level pads......6 pcs Tool set & Box Operation manual & parts list Full length splash guard Halogen lamp OPTIONAL ACCESSORIES: 3-Jaws scroll 9" chuck 4-Jaws independent 10" chuck Driving plate with dog 5C collets (metric or inch) Driving plate with dog Chuck Safety Guards Electrical system for CE Faceplate 12" Digital read out system Carriage micro stop set Drill chuck & arbor Rotating center MT.4 Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post Protect cover on leadscrew for CE

ERL Series

All models with oil bathed lubrication system to headstock All models meet CE. (on request) All models with 40mm (1.57") spindle bore, ASA D1-4 FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model Wider bed way which give absorbs vibration HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator. fitted in cross slide nut. Safety clutch at feed shaft. One shot lubrication in carriage & top slide. Dual dials supply inch system screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Two point support by high grade precision, machine tool taper roller. ACCESSORIES STANDARD ACCESSORIES: Backplate for 7" chuck Dead center MT.3 Dead center MT.3 with carbide tip Spindle center sleeve MT.5 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 7" chuck 4-Jaws independent 8" chuck 5C collet closer attachment 5C collets (metric or inch) Driving plate with dog Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 12" Drill chuck & arbor Rotating center MT.3 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

FC Series

All models with one piece solid stand All models with universal feed gearbox & reversable apron All models meet CE. (on request) All models with 80mm (3.149") spindle bore, ASA D1-8 All models cross slide is hardened and ground to prolong operation life FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operatrion. HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator fitted in cross slide nut. Safety clutch at feed shaft. Oneshot lubrication in carriage & top slide. Dual dials supply inchsystem screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Three point support by high grade precision, machine tool taper roller & ball bearings. ACCESSORIES STANDARD ACCESSORIES: Backplate for 10" chuck Dead center MT.5 Dead center MT.4 with carbide tip Spindle center sleeve........O85mm Taper 1/19.18 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 10" chuck 4-Jaws independent 12" chuck 5C collet closer attachment 5C collets (metric or inch) Faceplate 14" Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

Серия CH

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Extremely low noise level. Foot brake pedal provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. Oil distributor may be adjusted to lubricate bedways, cross slide, or both. Automatic and manual forced lubrication pump offered oil to bed ways and cross slide. RUGGED HEADSTOCK Forced lubrication to all running points. Head housing features outstanding vibration dampening and deformation free performance. Rugged head construction gives extra rigidity and heavy cutting. All gears and shaft are hardened and precision ground. UNIVERSAL GEARBOX The universal type gear box provides a wide range of inch & metric threads without changing any gear for increasing convenience. Gears are hardened Oil bath lubrication in gear box HEAVY DUTY SPINDLE Camlock type spindle Precision machined from forged alloy steel, hardened, precision ground and dynamically balanced. Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting. APRON A manual & automatic lubrication system equipped to keep the sliding ways and bedways lubricated. Choice of right or left hand wheel. An overload protection device equipped to avoid machine damaged. RUGGED TAILSTOCK Tailstock quill is graduated in inch / metric scales. It has a tang slot for positive drive of tool. Two - step tailstock provide smoothly operation. ACCESSORIES STANDARD ACCESSORIES: Dead center MT.5 Dead center MT.5 with carbide tip Spindle center sleeve MT.7 Level pads 6 - 10 pcs Tool set and box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 12" / 16” chuck 4-Jaws independent chuck 16" & 18” Chuck safety guard Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.5 Halogen lamp Quick change tool post Digital read out system Full length splash guard Tool post safety guard

Серия AHL

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model. Wider bed way which give absorbs vibration. LUBRICATION Oil sight window for efficient check of oil levelaction. Pressure lubrication system in headstock can ensure it's lubricated and cooling when high speed cutting. Splash lubrication in feed gearbox & apron. CARRIAGE & SLIDE Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. Induction hardened & precision ground gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward &reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator. fitted in cross slide nut. Safety clutch at feed shaft. One shot lubrication in carriage & top slide. Dual dials supply inch system screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Three point support by high grade precision, machine tool taper roller & ball bearings. ACCESSORIES STANDARD ACCESSORIES: Backplate for 12" chuck Dead center MT.5 Dead center MT.5 with carbide tip Spindle center sleeve MT.7 Level pads......8 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 12" chuck 4-Jaws independent chuck 12" for 18....or 14" for 21... 5C collet closer attachment 5C collets (metric or inch) Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 14" Drill chuck & arbor Rotating center MT.5 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

SUN CHUAN