ERL Series

ERL – 1330 / 1340 ERL – 1330V / 1340V

Description

  1. All models with oil bathed lubrication system to headstock
  2. All models meet CE. (on request)
  3. All models with 40mm (1.57″) spindle bore, ASA D1-4

FEATURE

  • All castings are properly stabilized and stress relieved.
  • Bed ways are hardened & ground to min. HS-70.
  • Extremely low noise level.
  • Foot brake pedal provided.
  • Built-in coolant pump & fitting provided.
  • CSS (constant surface speed control) on request for E.V.S. model
  • Wider bed way which give absorbs vibration

HEADSTOCK

  • Housing is vibration-absorbent, deflection-free.
  • Gears are hardened & MAAG or REISHAUER ground.

 

GEAR BOX

  • Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.

APRON

  • R/H or L/H wheel can be available on request.
  • Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds.

CARRIAGE & SLIDE

  • Anti-Float design backlash eliminator.
  • fitted in cross slide nut.
  • Safety clutch at feed shaft.
  • One shot lubrication in carriage & top slide.
  • Dual dials supply inch system screw.
  • Metric dial supply metric system only.

SAFETY FEATURES

  • Nylon safety gears in end train.
  • Shear pin in leadscrew.

HEAVY DUTY SPINDLE.

  • Machined from forged alloy steel, hardened ground & dynamically balanced.
  • Two point support by high grade precision, machine tool taper roller.

 

ACCESSORIES
STANDARD ACCESSORIES:

  • Backplate for 7″ chuck
  • Dead center MT.3
  • Dead center MT.3 with carbide tip
  • Spindle center sleeve MT.5
  • Level pads……6 pcs
  • Tool set & Box
  • Operation manual & parts list

 

OPTIONAL ACCESSORIES:

  • 3-Jaws scroll 7″ chuck
  • 4-Jaws independent 8″ chuck
  • 5C collet closer attachment
  • 5C collets (metric or inch)
  • Driving plate with dog
  • Chuck safety guard
  • Hydraulic copying attachment
  • Tool post grinder attachment
  • Taper turning attachment
  • Electrical system for CE
  • Protect cover on leadscrew for CE
  • Steady rest w/ball bearing
  • Follow rest w/bronze tip
  • Faceplate 12″
  • Drill chuck & arbor
  • Rotating center MT.3
  • Halogen lamp
  • Quick change tool post
  • Carriage micro stop set
  • Digital read out system
  • Full length splash guard

 

Specifications