FEATURE
- All castings are properly stabilized and stress relieved.
- Bed ways are hardened & ground to min. HS-70.
- Turcite B coating between the bed and carriage.
- Extremely low noise level.
- Foot brake pedal provided.
- Built-in coolant pump & fitting provided.
- CSS (constant surface speed control) on request for E.V.S. model.
- Wider bed way which give absorbs vibration.
 |
LUBRICATION
- Oil sight window for efficient check of oil levelaction.
- Pressure lubrication system in headstock can ensure it’s lubricated and cooling when high speed cutting.
- Splash lubrication in feed gearbox & apron.
|
 |
CARRIAGE & SLIDE
- Housing is vibration-absorbent, deflection-free.
- Gears are hardened & MAAG or REISHAUER ground.
|
 |
GEAR BOX
- Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears.
- Induction hardened & precision ground gears.
|
 |
APRON
- R/H or L/H wheel can be available on request.
- Integrated automatic control for longitudinal & cross feeds, forward &reverse feeds.
|
 |
CARRIAGE & SLIDE
- Anti-Float design backlash eliminator.
- fitted in cross slide nut.
- Safety clutch at feed shaft.
- One shot lubrication in carriage & top slide.
- Dual dials supply inch system screw.
- Metric dial supply metric system only.
|
|
SAFETY FEATURES
- Nylon safety gears in end train.
- Shear pin in leadscrew.
|
 |
HEAVY DUTY SPINDLE.
- Machined from forged alloy steel, hardened ground & dynamically balanced.
- Three point support by high grade precision, machine tool taper roller & ball bearings.
|
ACCESSORIES
STANDARD ACCESSORIES:
- Backplate for 12″ chuck
- Dead center MT.5
- Dead center MT.5 with carbide tip
- Spindle center sleeve MT.7
- Level pads……8 pcs
- Tool set & Box
- Operation manual & parts list
OPTIONAL ACCESSORIES:
- 3-Jaws scroll 12″ chuck
- 4-Jaws independent chuck 12″ for 18….or 14″ for 21…
- 5C collet closer attachment
- 5C collets (metric or inch)
- Chuck safety guard
- Hydraulic copying attachment
- Tool post grinder attachment
- Taper turning attachment
- Electrical system for CE
- Protect cover on leadscrew for CE
- Steady rest w/ball bearing
- Follow rest w/bronze tip
- Faceplate 14″
- Drill chuck & arbor
- Rotating center MT.5
- Halogen lamp
- Quick change tool post
- Carriage micro stop set
- Digital read out system
- Full length splash guard
