E.V.S models with auto lubrication system to headstock & external tank for cooling the oil All models with one piece solid stand All models with universal feed gearbox & reversable apron All models meet CE. (on request) All models with 52.5mm (2.066") spindle bore, ASA D1-6 FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model. Wider bed way which give absorbs vibration. E.V.S. MODEL ELECTRIC CONTROL CE electric on request. The electric cabinet is sealed protected against entrance of water, dirt and other contaminants. A main disconnect switch provided. Electric 1/4HP pump for headstock pressure lubrication. Prolong life expectancy of gears and spindle. Combination of forced lubrication and oil bath system in headstock.   HEAVY DUTY SPINDLE Machined from forged alloy steel, hardened ground & dynamically balanced. Supported by three points precision bearings (2 taper roller & 1 ball bearing). E.V.S. HEADSTOCK Forced lubrication to all running points. Hardened & ground gears and shafts. R.P.M. LED display indicator makes it easy to obtain the optional constant surface. Electronic control panel located on top head stock, with RPM display unit, speed control electric knob, emergency stop and motor start push button. Electronic infinitely variable speed with A.C. motor inverter. Two headstock gear speed ranges supply a high torque in low range from 20 up to 400 RPM and in high range from 400 up to 2500 R.P.M.     ACCESSORIES STANDARD ACCESSORIES: Backplate for 9" chuck Dead center MT.4 Dead center MT.4 with carbide tip Spindle center sleeve MT.6 Level pads......6 pcs Tool set & Box Operation manual & parts list   OPTIONAL ACCESSORIES: 3-Jaws scroll 9" chuck 4-Jaws independent 10" chuck 5C collet closer attachment 5C collets (metric or inch) Driving plate with dog Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 12" Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

All models with oil bathed lubrication system to headstock All models meet CE. (on request) All models with 40mm (1.57") spindle bore, ASA D1-4 FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model Wider bed way which give absorbs vibration HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground.   GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator. fitted in cross slide nut. Safety clutch at feed shaft. One shot lubrication in carriage & top slide. Dual dials supply inch system screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Two point support by high grade precision, machine tool taper roller.   ACCESSORIES STANDARD ACCESSORIES: Backplate for 7" chuck Dead center MT.3 Dead center MT.3 with carbide tip Spindle center sleeve MT.5 Level pads......6 pcs Tool set & Box Operation manual & parts list   OPTIONAL ACCESSORIES: 3-Jaws scroll 7" chuck 4-Jaws independent 8" chuck 5C collet closer attachment 5C collets (metric or inch) Driving plate with dog Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 12" Drill chuck & arbor Rotating center MT.3 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard  

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Extremely low noise level. Foot brake pedal provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. Oil distributor may be adjusted to lubricate bedways, cross slide, or both. Automatic and manual forced lubrication pump offered oil to bed ways and cross slide. RUGGED HEADSTOCK Forced lubrication to all running points. Head housing features outstanding vibration dampening and deformation free performance. Rugged head construction gives extra rigidity and heavy cutting. All gears and shaft are hardened and precision ground. UNIVERSAL GEARBOX The universal type gear box provides a wide range of inch & metric threads without changing any gear for increasing convenience. Gears are hardened Oil bath lubrication in gear box HEAVY DUTY SPINDLE Camlock type spindle Precision machined from forged alloy steel, hardened, precision ground and dynamically balanced. Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting. APRON A manual & automatic lubrication system equipped to keep the sliding ways and bedways lubricated. Choice of right or left hand wheel. An overload protection device equipped to avoid machine damaged. RUGGED TAILSTOCK Tailstock quill is graduated in inch / metric scales. It has a tang slot for positive drive of tool. Two - step tailstock provide smoothly operation.   ACCESSORIES STANDARD ACCESSORIES: Dead center MT.5 Dead center MT.5 with carbide tip Spindle center sleeve MT.7 Level pads 6 - 10 pcs Tool set and box Operation manual & parts list   OPTIONAL ACCESSORIES: 3-Jaws scroll 12" / 16” chuck 4-Jaws independent chuck 16" & 18” Chuck safety guard Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.5 Halogen lamp Quick change tool post Digital read out system Full length splash guard Tool post safety guard