Manual Lathes Machines Series : SUN MASTER Manual Lathes Supplier

RML Series

E.V.S models with auto lubrication system to headstock & external tank for cooling the oil All models with one piece solid stand All models with universal feed gearbox & reversable apron All models meet CE. (on request) All models with 52.5mm (2.066") spindle bore, ASA D1-6 FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model. Wider bed way which give absorbs vibration. E.V.S. MODEL ELECTRIC CONTROL CE electric on request. The electric cabinet is sealed protected against entrance of water, dirt and other contaminants. A main disconnect switch provided. Electric 1/4HP pump for headstock pressure lubrication. Prolong life expectancy of gears and spindle. Combination of forced lubrication and oil bath system in headstock. HEAVY DUTY SPINDLE Machined from forged alloy steel, hardened ground & dynamically balanced. Supported by three points precision bearings (2 taper roller & 1 ball bearing). E.V.S. HEADSTOCK Forced lubrication to all running points. Hardened & ground gears and shafts. R.P.M. LED display indicator makes it easy to obtain the optional constant surface. Electronic control panel located on top head stock, with RPM display unit, speed control electric knob, emergency stop and motor start push button. Electronic infinitely variable speed with A.C. motor inverter. Two headstock gear speed ranges supply a high torque in low range from 20 up to 400 RPM and in high range from 400 up to 2500 R.P.M. ACCESSORIES STANDARD ACCESSORIES: Backplate for 9" chuck Dead center MT.4 Dead center MT.4 with carbide tip Spindle center sleeve MT.6 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 9" chuck 4-Jaws independent 10" chuck 5C collet closer attachment 5C collets (metric or inch) Driving plate with dog Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 12" Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

Série AHL-V

Tous les modèles avec embrayage mécanique. (à l'exclusion du modèle E.V.S) Tous les modèles ont un système de lubrification automatique pour le refroidissement de l'huile de la poupée et du réservoir extérieur Tous les modèles sont conformes CE. (sur demande) Tous les modèles avec trou de broche de 80 mm (3.149 po), ASA D1-8 Caractéristiques Toutes les pièces moulées sont correctement stabilisées et les contraintes sont éliminées. Couche de lit durcie, sol au minimum. HS-70. Couchage en épicéa B entre le lit et le compartiment. Très faible niveau de bruit. Pédale de frein au pied fournie. Pompe de refroidissement intégrée et accessoires. E.V.S. requis par CSS (Constant Surface Speed Control) Mannequin. La surface de lit plus large donne un moyen d'absorber les vibrations. Lubrification Fenêtre de niveau d'huile pour vérifier efficacement l'activité de niveau d'huile. Le système de lubrification sous pression de la poupée peut assurer la lubrification et le refroidissement de la poupée pendant la coupe à grande vitesse. Lubrification par éclaboussures de la boîte de vitesses d'alimentation et de la jupe. Supports et toboggans Le boîtier est absorbant les vibrations et ne dévie pas. Les engrenages sont durcis & MAAG ou REISHAUER Ground. Boîte de vitesses Le modèle universel permet une large gamme de pouces, métriques, millisecondes, millisecondes. Pas de filetage pour les engrenages à vitesse variable. Engrenages de rectification de précision trempés par induction. Tablier Les roues R/H ou L/H sont disponibles sur demande. Contrôle automatique intégré de l'alimentation longitudinale, croisée, avant et arrière. Supports et toboggans Conception anti-flottante, éliminateur de dégagement. Monté dans un écrou coulissant transversal. Embrayage de sécurité sur l'arbre d'alimentation. Lubrification primaire dans le compartiment et glisse sur le dessus. Le double cadran est fourni avec des vis système pouces. Les cadrans métriques sont fournis uniquement avec le système métrique. Caractéristiques de sécurité Engrenage de sécurité en nylon arrière. Goupille de cisaillement dans la vis. Broche lourde. Fabriqué à partir d'acier allié forgé, sol durci, homéostase. Support à trois points de haute précision, rouleaux coniques de machine-outil et roulements à billes. Annexe Accessoires standard: Plaque arrière de mandrin de 12 pouces Point mort MT.5 Carbure de tungstène cémenté pointe mort MT.5 Manchon central de broche MT.7 Coussins horizontaux... 8 pièces Boîtes à outils et boîtes à outils Manuel d'utilisation et liste des pièces Lampes halogènes Plaque anti-éclaboussures pleine longueur Accessoires en option: Mandrin roulant de 12 pouces à 3 griffes Mandrin indépendant à 4 griffes 12 "18... ou 14" 21... Accessoires plus serrés pour le mandrin 5C Dispositif de sécurité de mandrin Système électrique CE Système de lecture numérique Dispositif d'arrêt miniature de voiture Tige de serrage de foret Centre de rotation MT.5 Accessoires de tournage conique Roulements à billes W/roulements stabilisateurs Support de suivi W/pointe en bronze Porte-outils à changement rapide Couvercle de protection sur vis CE

Série CH-V

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Extremely low noise level. Foot brake pedal provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. Oil distributor may be adjusted to lubricate bedways, cross slide, or both. Automatic and manual forced lubrication pump offered oil to bed ways and cross slide. RUGGED HEADSTOCK Forced lubrication to all running points. Head housing features outstanding vibration dampening and deformation free performance. Rugged head construction gives extra rigidity and heavy cutting. All gears and shaft are hardened and precision ground. UNIVERSAL GEARBOX The universal type gear box provides a wide range of inch & metric threads without changing any gear for increasing convenience. Gears are hardened Oil bath lubrication in gear box HEAVY DUTY SPINDLE Camlock type spindle Precision machined from forged alloy steel, hardened, precision ground and dynamically balanced. Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting. APRON A manual & automatic lubrication system equipped to keep the sliding ways and bedways lubricated. Choice of right or left hand wheel. An overload protection device equipped to avoid machine damaged. RUGGED TAILSTOCK Tailstock quill is graduated in inch / metric scales. It has a tang slot for positive drive of tool. Two - step tailstock provide smoothly operation. ACCESSORIES STANDARD ACCESSORIES: Backplate for 12" chuck Dead center MT.5 Dead center MT.5 with carbide tip Spindle center sleeve MT#7 * MT#5 Level pads......6 ~ 10 pcs Tool set & Box Operation manual & parts list Full length splash guard Halogen lamp OPTIONAL ACCESSORIES: 3-Jaws scroll 12" / 16” chuck 4-Jaws independent chuck 16" & 18” Faceplate 20" Chuck safety guard Electrical system for CE Digital read out system Carriage micro stop set Drill chuck & arbor Rotating center MT.5 Taper turning attachment Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post Protect cover on leadscrew for CE

Série FC-V

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator fitted in cross slide nut. Safety clutch at feed shaft. Oneshot lubrication in carriage & top slide. Dual dials supply inchsystem screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Three point support by high grade precision, machine tool taper roller & ball bearings. ACCESSORIES STANDARD ACCESSORIES: Backplate for 10" chuck Dead center MT.5 Dead center MT.4 with carbide tip Spindle center sleeve........O85mm Taper 1/19.18 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 10" chuck 4-Jaws independent 12" chuck 5C collet closer attachment 5C collets (metric or inch) Faceplate 14" Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

Série TC-V

Série RML-V

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model. Wider bed way which give absorbs vibration. E.V.S. MODEL ELECTRIC CONTROL CE electric on request. The electric cabinet is sealed protected against entrance of water, dirt and other contaminants. A main disconnect switch provided. Electric 1/4HP pump for headstock pressure lubrication. Prolong life expectancy of gears and spindle. Combination of forced lubrication and oil bath system in headstock. HEAVY DUTY SPINDLE Machined from forged alloy steel, hardened ground & dynamically balanced. Supported by three points precision bearings (2 taper roller & 1 ball bearing). E.V.S. HEADSTOCK Forced lubrication to all running points. Hardened & ground gears and shafts. R.P.M. LED display indicator makes it easy to obtain the optional constant surface. Electronic control panel located on top head stock, with RPM display unit, speed control electric knob, emergency stop and motor start push button. Electronic infinitely variable speed with A.C. motor inverter. Two headstock gear speed ranges supply a high torque in low range from 20 up to 400 RPM and in high range from 400 up to 2500 R.P.M. ACCESSORIES STANDARD ACCESSORIES: Backplate for 9" chuck Dead center MT.4 Dead center MT.4 with carbide tip Spindle center sleeve MT.6 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 9" chuck 4-Jaws independent 10" chuck 5C collet closer attachment Driving plate with dog Chuck safety guard Electrical system for CE Digital read out system Faceplate 12" Carriage micro stop set Drill chuck & arbor Rotating center MT.4 Taper turning attachment Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post

Série ERL-V

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model Wider bed way which give absorbs vibration HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator. fitted in cross slide nut. Safety clutch at feed shaft. One shot lubrication in carriage & top slide. Dual dials supply inch system screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Two point support by high grade precision, machine tool taper roller. ACCESSORIES STANDARD ACCESSORIES: Backplate for 7" chuck Dead center MT.3 Dead center MT.3 with carbide tip Spindle center sleeve MT.5 Level pads......6 pcs Tool set & Box Operation manual & parts list Full length splash guard Halogen lamp OPTIONAL ACCESSORIES: 3-Jaws scroll 7" chuck 4-Jaws independent 8" chuck 5C collet closer attachment Driving plate with dog Chuck safety guard Electrical system for CE Faceplate 12" Digital read out system Rotating center MT.3 Drill chuck & arbor Taper turning attachment Steady rest w/ball bearing Follow rest w/bronze tip Quick change tool post Protect cover on leadscrew for CE

Série TC

Caractéristiques Toutes les pièces moulées sont correctement stabilisées et les contraintes sont éliminées. Couche de lit durcie, sol au minimum. Résolutions 48 à 55 du Conseil des droits de l'homme. Couchage en épicéa B entre le lit et le compartiment. Très faible niveau de bruit. Pédale de frein au pied fournie. Pompe de refroidissement intégrée et accessoires. Accessoires standard: Plaque arrière de mandrin de 9 pouces Point mort MT.4 Point mort MT.4 pointe en carbure de tungstène cémenté Manchon central de broche MT.6 Coussins horizontaux... 6 pièces Boîtes à outils et boîtes à outils Manuel d'utilisation et liste des pièces Plaque anti-éclaboussures pleine longueur Lampes halogènes Accessoires en option: Mandrin de 9 "pour bobine à 3 griffes Mandrin indépendant de 10 pouces à 4 griffes Plaque d'entraînement avec chien 5C Mandrin (métrique ou pouce) Plaque d'entraînement avec chien Dispositif de sécurité de mandrin Système électrique CE Panneau 12 " Système de lecture numérique Dispositif d'arrêt miniature de voiture Tige de serrage de foret Centre de rotation MT.4 Roulements à billes W/roulements stabilisateurs Support de suivi W/pointe en bronze Porte-outils à changement rapide Couvercle de protection sur vis CE

ERL Series

All models with oil bathed lubrication system to headstock All models meet CE. (on request) All models with 40mm (1.57") spindle bore, ASA D1-4 FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HS-70. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. CSS (constant surface speed control) on request for E.V.S. model Wider bed way which give absorbs vibration HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator. fitted in cross slide nut. Safety clutch at feed shaft. One shot lubrication in carriage & top slide. Dual dials supply inch system screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Two point support by high grade precision, machine tool taper roller. ACCESSORIES STANDARD ACCESSORIES: Backplate for 7" chuck Dead center MT.3 Dead center MT.3 with carbide tip Spindle center sleeve MT.5 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 7" chuck 4-Jaws independent 8" chuck 5C collet closer attachment 5C collets (metric or inch) Driving plate with dog Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Faceplate 12" Drill chuck & arbor Rotating center MT.3 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

FC Series

All models with one piece solid stand All models with universal feed gearbox & reversable apron All models meet CE. (on request) All models with 80mm (3.149") spindle bore, ASA D1-8 All models cross slide is hardened and ground to prolong operation life FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Turcite B coating between the bed and carriage. Extremely low noise level. Foot brake pedal provided. Built-in coolant pump & fitting provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operatrion. HEADSTOCK Housing is vibration-absorbent, deflection-free. Gears are hardened & MAAG or REISHAUER ground. GEAR BOX Universal type allowing a wide range of inch, metric, M.P., D.P. threads without change gears. APRON R/H or L/H wheel can be available on request. Integrated automatic control for longitudinal & cross feeds, forward & reverse feeds. CARRIAGE & SLIDE Anti-Float design backlash eliminator fitted in cross slide nut. Safety clutch at feed shaft. Oneshot lubrication in carriage & top slide. Dual dials supply inchsystem screw. Metric dial supply metric system only. SAFETY FEATURES Nylon safety gears in end train. Shear pin in leadscrew. HEAVY DUTY SPINDLE. Machined from forged alloy steel, hardened ground & dynamically balanced. Three point support by high grade precision, machine tool taper roller & ball bearings. ACCESSORIES STANDARD ACCESSORIES: Backplate for 10" chuck Dead center MT.5 Dead center MT.4 with carbide tip Spindle center sleeve........O85mm Taper 1/19.18 Level pads......6 pcs Tool set & Box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 10" chuck 4-Jaws independent 12" chuck 5C collet closer attachment 5C collets (metric or inch) Faceplate 14" Chuck safety guard Hydraulic copying attachment Tool post grinder attachment Taper turning attachment Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.4 Halogen lamp Quick change tool post Carriage micro stop set Digital read out system Full length splash guard

Série CH

FEATURE All castings are properly stabilized and stress relieved. Bed ways are hardened & ground to min. HRC48-55. Extremely low noise level. Foot brake pedal provided. Wider bed way which give absorbs vibration. Y-Δ type spindle motor equipped to make sure smooth start and operation. Oil distributor may be adjusted to lubricate bedways, cross slide, or both. Automatic and manual forced lubrication pump offered oil to bed ways and cross slide. RUGGED HEADSTOCK Forced lubrication to all running points. Head housing features outstanding vibration dampening and deformation free performance. Rugged head construction gives extra rigidity and heavy cutting. All gears and shaft are hardened and precision ground. UNIVERSAL GEARBOX The universal type gear box provides a wide range of inch & metric threads without changing any gear for increasing convenience. Gears are hardened Oil bath lubrication in gear box HEAVY DUTY SPINDLE Camlock type spindle Precision machined from forged alloy steel, hardened, precision ground and dynamically balanced. Three-point support by high precision taper roller and ball bearings eliminates chatter when performing heavy cutting. APRON A manual & automatic lubrication system equipped to keep the sliding ways and bedways lubricated. Choice of right or left hand wheel. An overload protection device equipped to avoid machine damaged. RUGGED TAILSTOCK Tailstock quill is graduated in inch / metric scales. It has a tang slot for positive drive of tool. Two - step tailstock provide smoothly operation. ACCESSORIES STANDARD ACCESSORIES: Dead center MT.5 Dead center MT.5 with carbide tip Spindle center sleeve MT.7 Level pads 6 - 10 pcs Tool set and box Operation manual & parts list OPTIONAL ACCESSORIES: 3-Jaws scroll 12" / 16” chuck 4-Jaws independent chuck 16" & 18” Chuck safety guard Electrical system for CE Protect cover on leadscrew for CE Steady rest w/ball bearing Follow rest w/bronze tip Drill chuck & arbor Rotating center MT.5 Halogen lamp Quick change tool post Digital read out system Full length splash guard Tool post safety guard

Série AHL

Caractéristiques Toutes les pièces moulées sont correctement stabilisées et les contraintes sont éliminées. Couche de lit durcie, sol au minimum. HS-70. Couchage en épicéa B entre le lit et le compartiment. Très faible niveau de bruit. Pédale de frein au pied fournie. Pompe de refroidissement intégrée et accessoires. E.V.S. requis par CSS (Constant Surface Speed Control) Mannequin. La surface de lit plus large donne un moyen d'absorber les vibrations. Lubrification Fenêtre de niveau d'huile pour vérifier efficacement l'activité de niveau d'huile. Le système de lubrification sous pression de la poupée peut assurer la lubrification et le refroidissement de la poupée pendant la coupe à grande vitesse. Lubrification par éclaboussures de la boîte de vitesses d'alimentation et de la jupe. Supports et toboggans Le boîtier est absorbant les vibrations et ne dévie pas. Les engrenages sont durcis & MAAG ou REISHAUER Ground. Boîte de vitesses Le modèle universel permet une large gamme de pouces, métriques, millisecondes, millisecondes. Pas de filetage pour les engrenages à vitesse variable. Engrenages de rectification de précision trempés par induction. Tablier Les roues R/H ou L/H sont disponibles sur demande. Contrôle automatique intégré de l'alimentation longitudinale, croisée, avant et arrière. Supports et toboggans Conception anti-flottante, éliminateur de dégagement. Monté dans un écrou coulissant transversal. Embrayage de sécurité sur l'arbre d'alimentation. Lubrification primaire dans le compartiment et glisse sur le dessus. Le double cadran est fourni avec des vis système pouces. Les cadrans métriques sont fournis uniquement avec le système métrique. Caractéristiques de sécurité Engrenage de sécurité en nylon arrière. Goupille de cisaillement dans la vis. Broche lourde. Fabriqué à partir d'acier allié forgé, sol durci, homéostase. Support à trois points de haute précision, rouleaux coniques de machine-outil et roulements à billes. Annexe Accessoires standard: Plaque arrière de mandrin de 12 pouces Point mort MT.5 Carbure de tungstène cémenté pointe mort MT.5 Manchon central de broche MT.7 Coussins horizontaux... 8 pièces Boîtes à outils et boîtes à outils Manuel d'utilisation et liste des pièces Accessoires en option: Mandrin roulant de 12 pouces à 3 griffes Mandrin indépendant à 4 griffes 12 "18... ou 14" 21... Accessoires plus serrés pour le mandrin 5C 5C Mandrin (métrique ou pouce) Dispositif de sécurité de mandrin Accessoires de profilage hydraulique Accessoires pour meuleuses porte-outils Accessoires de tournage conique Système électrique CE Couvercle de protection sur vis CE Roulements à billes W/roulements stabilisateurs Support de suivi W/pointe en bronze Panneau 14 " Tige de serrage de foret Centre de rotation MT.5 Lampes halogènes Porte-outils à changement rapide Dispositif d'arrêt miniature de voiture Système de lecture numérique Plaque anti-éclaboussures pleine longueur

Photo Sun Chuan