Model Number Explanation

Type : The standard types are marked with W.B. and K. Model numbers suffixed with an E represent direct drive models. Model numbers suffixed with H, such as BH and KH, represent 2-stage worm gear reducer which is normally an intrant-type reducer.

Model : Defined by the center dostance between shafts. The higher the model number, the higher the reducer structure.

Reduction Ratio : The higher the speed reduction ratio, the lower running speed of output shaft. The speed reduction range for single stage worm gear reducers is 1/5~1/100.The reduction ratio range for 2-stage worm gear reducers is 1/100~1/3600.

Shaft Direction:

• L- Left Output(When the user faces the input shaft, the output shaft is located on the left side.)
• R-Right Output(When the user faces the input shaft, the output shaft is located on the right side.)
• DI-Two input shafts with single output shaft.
• DO-Single input shaft with two output shafts.
• DIO-Two input shafts with two output shafts.
• RDO-Right, two output shafts(K type).
• LDO-Left, two output shafts(K type).
• Co-Hollow shaft.

Horsepower : 1/8 HP~30HP